MOTHERBOARD SUPPORT: E-ATX (width: under 280mm)/ATX /M-ATX/ITX
PSU SUPPORT:220mm
FAN SUPPORT: Top: 120mm × 3 or 140mm × 2 Side: 120mm × 3 or 140mm × 2 Bottom: 120mm × 3 or 140mm × 2 Rear: 120mm × 1 On Drive Cage: 60mm × 1
RADIATOR SUPPORT Top: 360mm × 1 or 280mm × 1 Total max thickness: 87.5mm Side: 360mm × 1 or 280mm × 1
DRIVE SUPPORT Bottom：2.5” SSD × 4 or 3.5”
HDD × 2 Side：2.5” SSD × 4 or 3.5” HDD × 2 Drive Cage：2.5” SSD × 3 or 3.5” HDD × 2 + 2.5” SSD × 1
Cable Management Bar：2.5” SSD × 2 Only 9 sets of 2.5” SSD mounting pads are provided
GPU LENGTH CLEARANCE 422 mm
CPU HEIGHT CLEARANCE 167 mm
EXPANSION SLOTS 8
I/O PORTS: 2 × USB 3.0 1 × USB 3.1 TYPE-C, 1 × HD AUDIO/ MIC
LED Color and Mode button Reset Button Power Button
DUST FILTER: Bottom

Neither! we use a special process to print directly onto the PC Chassis and chemically bond the design in place - this creates an extremely robust print that will outlast stickers or decals and be much stronger than standard painting or print processes.

The average turn around for a printed pc case is approximately a week - but we often ship them out earlier than this!

If there are any significant delays or stock shortages we'll be in touch ASAP!

We've designed these prints to be as robust as possible, and they easily stand up to normal PC usage and shipping. In our testing we found that we had to use a metal paint scraper to even make a scratch!
However we do recommend that when you're assembling or doing maintenance on your PC, that you remove the printed panels until work is complete, to minimize the chance of damaged the artwork.